Wall Boards

So I'm cleaning up my computer room and I come across an old Expo combination wallboard that we used in the old house (4 years ago).  It is just to big to hang up in the computer room, and it's so bulky with it's metal frame.  So I decided to tear it apart and create two separate boards.

I'm gonna stop right here for a second and mention that it took me almost 30 minutes to figure out how to create the above picture.  I did not know how to combine two pictures and text into one picture! Yay but now I know.  Okay back to the craft at hand.

I used just a handful of materials that I had around the house.

Old wallboard
Tacky Glue
Staples
Scissors
Fabric - I went for patterns that wouldn't show if I put it on crooked!
Packing Tape

- The hardest thing was to tear away the metal frame from the wallboard.  I had to remove all of the screws then use a screwdriver to pry one end off.  I was expecting the dry erase part to be glued onto the backboards but it was not.  So now I have a separate project to work on!
- I placed my board on the fabric and cut the fabric, with a good inch or two extra on each side.

- Then it was off to the ironing board (I do NOT like to iron)
- Once it was done, I placed my fabric right side down and put the backboard onto of it.  I put a line of glue on the top side on one side. I did the smaller sides first (tops/bottoms) Okay my "line" was more like a squiggle

- I pulled the fabric up and over and pressed it into the glue.  Now I'm sure I could have stopped here.
- But I like to know that things are secure, so then I stapled the fabric onto the back.  I did it quickly so the glue could ooze around the staple.

- I repeated this process for the bottom, then the two sides.  On the sides you have to fold in the corners a bit so that it looks nice.
- Once done with all of the glue and stapling I decided to put a strip of packing tape on all of the edges of the fabric.  I figured this way it can't fray. And you can't really see it, since it's gonna be against a wall.

And then it was done! I'm gonna hang it using a few command strips, gosh I love those things!

 I have a cork board in a wood frame that I'm thinking of trying this with, but I'm going to experiment with using a spray adhesive on the front side to hold the fabric onto the board. We'll see.....